There is a serious side effect in the recent update. I work on layers (sky, subject, gradients). Everything is fine until the saving. After the saving all the modifications made to separate layers apply to the whole image. I mean to the RAW layer.
IPadOS/iOS 17.3.1
3.3.3 update and layers’ problem
2024-02-25 14:22:50
2024-02-25 14:46:35
Hello,
Where did you get 3.3.2 and 3.3.3 releases ? I haven't them on the Apple store, only 3.3.1
(sorry I can't solve your problem !)
And my first post friday is still on approval status, very strange.
Where did you get 3.3.2 and 3.3.3 releases ? I haven't them on the Apple store, only 3.3.1
(sorry I can't solve your problem !)
And my first post friday is still on approval status, very strange.
2024-02-27 10:30:12
There is one in my Appstore. Since 22 February.
2024-02-27 12:29:35
This is a very big problem. First I was thinking that is a problem with my device but I checked on iPad and there is the same issue.
2024-02-27 14:09:40
Ok, thanks 
2024-02-27 23:43:25
Fixed in 3.3.4… NOT.
2024-02-28 07:11:50
Hi there, if you're having this issue, could you possibly create a screen recording and send it to us at support@pixelmator.com? Simply adding a sky adjustment layer and adjusting it doesn't seem to cause this to happen, so there's probably something else contributing to it. Thanks in advance!
2024-02-28 20:37:13
There is no other factor.
The workflow is as following:
1. Unmodified RAW photo
2. Adding a sky layer.
3. Modification.
4. Saving
5. Reopening a photo
5. Modification of the sky layer (or any other layer).
7. Saving.
After that all the modifications apply to the whole image/RAW layer
Slightly different workflow:
1. Unmodified RAW photo
2. Adding a sky layer AND its modification.
3. Saving
4. Reopening a phoro
5. Modification of the sky layer (or any other layer).
6. Saving.
After that all the modifications apply to the whole image/RAW layer.
I am pointing out in both cases the problem occurs after the second saving.
Same with modification and saving other layers such as subject or gradient.
IPadOS 17.3.1 and iOS 17.3.1
The workflow is as following:
1. Unmodified RAW photo
2. Adding a sky layer.
3. Modification.
4. Saving
5. Reopening a photo
5. Modification of the sky layer (or any other layer).
7. Saving.
After that all the modifications apply to the whole image/RAW layer
Slightly different workflow:
1. Unmodified RAW photo
2. Adding a sky layer AND its modification.
3. Saving
4. Reopening a phoro
5. Modification of the sky layer (or any other layer).
6. Saving.
After that all the modifications apply to the whole image/RAW layer.
I am pointing out in both cases the problem occurs after the second saving.
Same with modification and saving other layers such as subject or gradient.
IPadOS 17.3.1 and iOS 17.3.1
2024-03-01 09:05:32
Ahh, it was the multiple saves that was causing the issue – great, we've found the problem and fixed it. Update coming soon.
2024-03-02 10:35:37
Fixed in 3.3.5. Both in iOS and iPadOS.
Thank you.
Am I the only one who had this issue?
Thank you.
Am I the only one who had this issue?